We are the one and only authorized reseller in Canada. If you purchase your Fanatec products from Simulation1, we will be happy to take care of all your warranty needs. For more information, please check our warranty section on our webpage.
Yes, we use 2.3mm thick walled carbon steel tubing throughout the cockpit, along with a real car sports seat. We have many customers that are over 300lbs and 6ft 5in tall with no issus at all.
The monitor is mounted roughly around 2-3 inches behind the steering wheel console. I am 6ft 2in tall and with me in a proper race driving position the monitor is around 25 inches from my eyes.
It can support the weight, but the VESA bolt pattern on your 32? TV may differ from our pre-drilled bolt patterns on the mount. It is an easy mod to make an adaptor plate to bolt to our monitor mount if required. There may be clearance issues on the bottom side of the TV since the monitor stand positions the monitor so close to the steering mount but this can also be modded. NOTE; a 32? TV in this location is really close to the player in my opinion. go triple monitors, you’ll never go back
it is height and distance adjustable. The higher you position the steering wheel, the closer it will be to you since it sits at an angle. Our cockpits are one of the few that actually allows a proper race driving seating position.
Any steering wheel that clamps to a desk, or can be hard mounted, will fit our cockpit. We have customers using various steering wheels from these popular brands: Logitech, ECCI, Fanatec, Saitek and Microsoft.
Simulation 1 Systems Hassanicor Building Floor 2, Office 204, Al Barsha 1 Sheikh Zayed Road, P.O.Box: 71849, Dubai, United Arab Emirates, Phone: +9714 392 9818, +971552883951, +9714 392 9819